12-01-2021, 01:18 PM | #1 |
Not Yet Wild
Join Date: Jun 2021
Location: Tampa
Posts: 1
|
Tuning Software Profiles for Icon
Have been screwing around with the settings on my cart (I40FL with 180ah Allied LiPos).
Does anyone have a profile saved somewhere they can share that has aggressive acceleration/max speed because I feel like I'm missing something. I have the acceleration set to .1. I reduced it from 6 to 3, and then 2... moving it anywhere lower than that didn't do anything noticeable. I had it set on .01 and noticed no different. With MAX RPMS for REV and acceleration at 4, it backs up more quickly than it goes forward and has a hell of a lot more torque (it seems). Ive seen carts that have some wicked acceleration off the line and mine definitely does not have that. I mean, it def is faster than my buddies cart by a long shot (same model, lead acid), but its not the 'whiplash' inducing acceleration. Anyone have a profile they care to share or some suggestions on the settings? Acceleration is what I care most about... I use this downtown and that's a lot more important than top end (which is the easiest to set). |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-01-2021, 07:39 PM | #2 |
Not Yet Wild
Join Date: Nov 2021
Posts: 7
|
Re: Tuning Software Profiles for Icon
adjust to torque/speed profile... i got mine to 0-20 in no time.. now 20-35 thats a different story
|
01-20-2022, 11:44 AM | #3 |
Not Yet Wild
Join Date: Jan 2022
Posts: 1
|
Re: Tuning Software Profiles for Icon
Where can I get a copy of the tuning software? I have the cable just can't find a place to get the software.
|
01-24-2022, 06:38 PM | #4 |
Not Yet Wild
Join Date: Jan 2022
Location: SE Florida
Posts: 4
|
Re: Tuning Software Profiles for Icon
I just recently got my i40L. Love it, wish it could be a bit faster. I am looking to find the software also. On this site I found it posted, but the post has expired. Plus it said it was for 2021 and under. I am looking for 2022 software.
|
01-31-2022, 10:36 PM | #5 |
Getting Wild
Join Date: Dec 2015
Posts: 100
|
Re: Tuning Software Profiles for Icon
|
02-01-2022, 11:09 AM | #6 |
Not Yet Wild
Join Date: Jan 2022
Location: SE Florida
Posts: 4
|
Re: Tuning Software Profiles for Icon
|
02-10-2022, 05:41 PM | #7 |
Not Yet Wild
Join Date: Jan 2022
Posts: 8
|
Re: Tuning Software Profiles for Icon
I have an i20L and would like advise on how to increase the top-end speed to 30, currently it's at max 25. I don't care about the initial acceleration just the top end speed. Lead acid batteries, 48v, 2021 model. I have all the necessary tools (CANUSB, cable to laptop, software) so if anyone has a profile I can simply upload that would be appreciated, or just advise on what needs to be tweeked.
|
02-10-2022, 09:16 PM | #8 | |
Gone Wild
Join Date: Oct 2012
Location: SoCal
Posts: 671
|
Re: Tuning Software Profiles for Icon
Quote:
In the below sample picture, I had set mine to 7000. Ignore the red part. Honestly I'd recommend you set it higher than 6000 only because it's the "top end" speed...you won't actually hit it that often. Imagine if you set your car's "top speed" to 600mph. Doesn't mean it's going to get there. I'd set it to 6500 (32.5mph) or 7000 (35mph) and you'll most likely hit 31mph when there is 1 person on it and you're on a flat surface for a good stretch. |
|
02-18-2022, 10:14 AM | #9 | |
Not Yet Wild
Join Date: May 2021
Location: South Florida
Posts: 33
|
Re: Tuning Software Profiles for Icon
Quote:
|
|
04-04-2022, 12:01 PM | #10 |
Gone Wild
Join Date: Jan 2014
Location: FL
Posts: 294
|
Re: Tuning Software Profiles for Icon
|
|
|
Similar Threads | ||||
Thread | Forum | |||
NEOS/ICON Programming Software Troubleshooting | Icon | |||
ICON Portal Charging algorithm software | Icon | |||
Icon Tuning w/ NEOS Software | Icon | |||
SPM Profiles | Extreme DC! |