|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-26-2021, 06:22 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2018
Location: West Columbia - TEXAS
Posts: 16
|
Alltrax 48400 install
My buddy is looking to upgrade his 36v PDS cart’s controller.
He has just acquired a new alltrax xct 48400… Question… Are there going to be any issues installing this controller on a 36v cart? I am somewhat familiar with the alltrax SR controllers as I have the sr72500 on my 01 36v series cart. Will I be able to do a simple swap (following alltrax instructions of course) or will there be some mods needed??? It does have the mounting bracket for heatsink and solenoid bracket. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-27-2021, 09:24 AM
|
#2 |
|
Gone Wild
 Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
|
Re: Alltrax 48400 install
That controller is compatible with a 36v or 48v or 58v pack. So he can use it now and upgrade to 48v lead acid or 58v lithium later and still use the same controller.
|
|
|
|
|
09-27-2021, 11:29 AM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 48400 install
This control is plug and play for the PDS cart. Simply tag the cables before disassembly so you can easily identify which is B- or M- when reconnecting. The Controller includes a new solenoid mount bracket. Note the control requires a bigger 200 amp solenoid.
|
|
|
|
09-27-2021, 11:33 AM
|
#4 | |
|
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: Alltrax 48400 install
Quote:
 Also, in addition to the tag requirement, take some photos (take two or three from different angles and distances) BEFORE you undo the existing one.I just upgraded to a SR500 that I got from Scotty. Installation was a swap and the only issues I had were ones that I created. (Mounting to the heat sink) Then my only other matter was to tune the voltage parameters, and the speed\torque curve.....but it's all good and I'm climbing mountains again!!  |
|
|
|
|
|
09-27-2021, 11:36 AM
|
#5 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 48400 install
Quote:
|
|
|
|
|
|
09-27-2021, 11:40 AM
|
#6 | |
|
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: Alltrax 48400 install
Quote:
And thank you for all the support you provide to members here! |
|
|
|
|
|
09-27-2021, 02:52 PM
|
#7 |
|
Not Yet Wild
Join Date: Aug 2018
Location: West Columbia - TEXAS
Posts: 16
|
Re: Alltrax 48400 install
Thanks fellas
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Marathon alltrax 48400 help | Electric EZGO | |||
| Alltrax XCT 48400 Won’t Power On | Electric Club Car | |||
| Alltrax XCT 48400 | Electric EZGO | |||
| Alltrax XCT 48400 Install on Club Car DS | Electric Club Car | |||
| Alltrax XCT-48400 question | Electric Yamaha | |||
Linear Mode
