|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-07-2015, 03:27 PM | #1 |
Gone Wild
Join Date: Nov 2012
Posts: 164
|
Where do I start
I will start a new thread because my original thread (Solenoid cables burnt) looks like it changed conversations. How can I determine the extent of my damage. I burnt the cables on the plus side of the solenoid plus the minus cable from the battery to the B- on the controller.That cable was too close to the solenoid. The HD 48a solenoid will be in tomorrow, so it will be the first thing I install. All the wires are fixed. Should I turn the cart on to see if it works or should I start somewhere else. I'm pretty sure there is extensive damage but I don't want to make things worse.
2005 Western cart 42 volt Alltrax DCX400 4 gauge cables MZJ0200D solenoid |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
How do I wire start and run with a key instead of pedal start/stop | Gas Club Car | |||
Converting from pedal start to key start | Gas Club Car | |||
need to change carryall IV key start to pedal start | Gas Club Car | |||
whats the difference between a key start and pedal start fe350ccw? | Gas Club Car | |||
E-Z GO Has Trouble to Start Randomly and Now It Will Not Start | Electric EZGO |