|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-10-2018, 10:23 PM | #1 |
Not Yet Wild
Join Date: Jan 2018
Posts: 37
|
Spade Terminals for AllTrax controller
Hey Folks,
Just got my Alltrax controller and solenoid. I didn’t realize the alltrax controller had spade connectors. I did some searching, but I’m having trouble finding the right connectors. Looks like I need 1/4” female spade connectors that will crimp onto 2GA finely stranded welding wire. Can anyone point me at a place where I can find those? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-10-2018, 10:40 PM | #2 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,218
|
Re: Spade Terminals for AllTrax controller
Is this what you're looking for? Notice that they are 5/16 not 1/4
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1 |
02-10-2018, 11:01 PM | #3 |
Not Yet Wild
Join Date: Jan 2018
Posts: 37
|
Re: Spade Terminals for AllTrax controller
No it turns out I’m an idiot. I misread the wiring diagram and thought I needed to be able to install 2GA wire into spade terminals instead of lug terminals. The 4 spade terminals aren’t the high amperage wires.
|
02-10-2018, 11:14 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Spade Terminals for AllTrax controller
For the SR controllers you will cut off the 4 pin molex connector and install 4 pieces 1/4 spade connector -
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Controller, no Voltage on Field Terminals | Electric Club Car | |||
Alltrax SR controller. What is the green spade connector port for? | Electric EZGO | |||
New alltrax xct 500 terminals bend? | Electric Club Car | |||
Insulated spade terminals | Electric EZGO | |||
Overheating controller terminals. | Electric Club Car |