|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-15-2019, 09:08 AM | #21 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ez Go Marathon Not Working
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-15-2019, 02:29 PM | #22 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ez Go Marathon Not Working
|
04-15-2019, 02:40 PM | #23 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ez Go Marathon Not Working
Quote:
|
|
04-15-2019, 08:34 PM | #24 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Ez Go Marathon Not Working
As far as adjustments no not really. You can have weak cam springs on the contacts and it will not engage the contacts to let it pass the juice. If the springs are weak and don't push the contacts together it will do as you say.
Just a suggestion. Take the F/R switch and move it back and forth several times. Also try backing off the nut are tighting it to see if it helps. Also the micro switch in front of the controller has to activate for the controller to power up. Have you checked it to see if power is getting to the controller? |
04-15-2019, 08:57 PM | #25 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Ez Go Marathon Not Working
You cart should have this type of controller and throttle and solenoid and micro switch. Not the exact same as my picture but the components should all be there. (Mine are 72 volt stuff) The micro switch has to operate for the controller to power up before the cart will move. Make sure the small wires are on the right terminals as well.
Now as far as the F/R cam goes: If you took the old one off and didn't put the new one back on just like the old one came off then it would only worked in on direction but not the other.So if you didn't check both ways you could have it out. You could also have the wires on the micro switches wrong. |
04-15-2019, 09:07 PM | #26 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ez Go Marathon Not Working
He could also, dunno, use a handheld meter?? His does volts, but maxes out at 600 ohms. Ohms law and a known voltage could give him what he needs.
|
04-15-2019, 09:16 PM | #27 | |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Ez Go Marathon Not Working
Quote:
Non of you asked if he had power to the controller are mentioned the fact about checking the micro switch which he can do with his meter he already has. |
|
04-15-2019, 09:23 PM | #28 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ez Go Marathon Not Working
I don't disagree Andy. Just bein' ornery late at night. Coffee done wore off.
Pot box is variable in one direction - 0 ohms to 600+ then OL, and only 0 ohms in the other, yet cart won't run in either direction. |
04-15-2019, 09:49 PM | #29 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Ez Go Marathon Not Working
That's correct and again if the micro's aren't working then the Pot ant working.
The micro's work off the cam inditions to turn on and off if it's not right then they don't work and in turn the pot doesn't. It's all a guessing game at best we are playing. |
04-15-2019, 10:33 PM | #30 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ez Go Marathon Not Working
Quote:
Then |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
94 ezgo marathon stopped working | Electric EZGO | |||
EZGO Marathon Suddenly Stopped Working | Electric EZGO | |||
working on an '82 marathon | Gas EZGO | |||
Marathon Reverse Not Working | Gas EZGO | |||
Marathon 48 volt upgrade done and working Thanks! | Electric EZGO |