|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-24-2013, 09:40 AM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 6
|
help with ds suspension/steering
i just installed my first lift, a 6" jakes a-arm, and everything is good except i cant get the nuts to tighten on the end of the steering arm. i am talking about the nuts that hold the steering arm onto the spindle assembly.
they will not tighten enough to even get the small pin through the bolt before the bolt itself starts spinning. it is going to be the nut (#20) in the first diagram in this post.... http://www.buggiesgonewild.com/gas-c...numbers-2.html any suggestions? does the whole thing (#6 from the diagram) need to be replaced? thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-24-2013, 01:35 PM | #2 | |
Not Yet Wild
Join Date: Jan 2013
Location: North Texas
Posts: 36
|
Re: help with ds suspension/steering
Quote:
|
|
04-24-2013, 02:18 PM | #3 |
Not Yet Wild
Join Date: Mar 2013
Posts: 6
|
Re: help with ds suspension/steering
yes, they didnt spin when i loosened the nuts to remove them, but are spinning now, i thought maybe i broke them. i will try that, thank you
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Loose Steering In 1998 Series TXT w/ Frame Mounted Steering | Electric EZGO | |||
Steering & suspension | Electric Club Car | |||
Loose Steering In 1998 Series TXT w/ Frame Mounted Steering | Electric Club Car | |||
Steering/Suspension Question G16 | Gas Yamaha | |||
convert a tiller type steering to regular steering column | Gas Harley Davidson |