10-20-2020, 05:18 PM | #1 |
Not Yet Wild
Join Date: Oct 2020
Posts: 12
|
2021 L6 Elite - How to install light strips
I am looking to add some light strips under the cart body and also overhead under the canopy. All of the strips I can find for under the canopy seem to come with a power adapter and plug. How can I convert this to something that I can use on my golf cart? I am very new to modifying golf carts and there are no videos of the lithium versions. How do I know where to tap from?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-22-2020, 03:41 PM | #2 |
Not Yet Wild
Join Date: Oct 2020
Posts: 12
|
Re: 2021 L6 Elite - How to install light strips
So I figured a few things out... Looks like I can buy 12V light strips and just cut the wires & tap off of them to connect to 12V in the cart, but where do I tap off of 12V in the Lithium carts?
|
10-28-2020, 04:53 PM | #3 |
Not Yet Wild
Join Date: Oct 2020
Location: Mckinney Tx
Posts: 10
|
Re: 2021 L6 Elite - How to install light strips
I’m trying to do the same thing? Can’t figure out where to tap into? Have you figured it out? Darren in McKinney TX
|
10-28-2020, 05:00 PM | #4 |
Not Yet Wild
Join Date: Apr 2020
Location: Ventura County
Posts: 13
|
Re: 2021 L6 Elite - How to install light strips
|
10-28-2020, 10:26 PM | #5 |
Not Yet Wild
Join Date: Aug 2020
Location: St Charles, MO
Posts: 9
|
Re: 2021 L6 Elite - How to install light strips
My lithium 2021 s4 has 2 12v leads right by the fuse block. It did require me to add fuses. Put an Inline switch off those power leads. I run 2 whips off of it with no issues and switched to the empty spot on dash with a switch similar to factory.
|
10-29-2020, 05:47 AM | #6 |
Not Yet Wild
Join Date: Oct 2020
Location: Mckinney Tx
Posts: 10
|
Re: 2021 L6 Elite - How to install light strips
Would you be able to post a picture of what those leads look like and what you had to add to them. I attached a picture of 2 different wire but they seem like something other than a simple 12v lead. Thanks
|
10-29-2020, 06:44 AM | #7 |
Not Yet Wild
Join Date: Aug 2020
Location: St Charles, MO
Posts: 9
|
Re: 2021 L6 Elite - How to install light strips
Those are 12v leads you have in your hand. There will be two open slots in the fuse block those come out of. I use 15a fuses. Drop one in and those will be hot.
|
10-29-2020, 02:36 PM | #8 |
Not Yet Wild
Join Date: Oct 2020
Location: Mckinney Tx
Posts: 10
|
Re: 2021 L6 Elite - How to install light strips
Thanks for the help. Found the Fuze box and the 2 empty spots. Still have some questions. What type of connector is on the end of those red leads? You mentioned you used an inline switch? I need to connect the wire in this picture and then find a ground point. That is the controller for the led light strips that I’m wanting to install. Thanks for the ongoing help.
|
10-31-2020, 12:21 PM | #9 | |
Not Yet Wild
Join Date: Oct 2020
Posts: 12
|
Re: 2021 L6 Elite - How to install light strips
Quote:
Where did you find the fuse block? I found those 2 unused leads, but can't find a fuse block ANYWHERE. |
|
10-31-2020, 12:59 PM | #10 |
Not Yet Wild
Join Date: Oct 2020
Location: Mckinney Tx
Posts: 10
|
Re: 2021 L6 Elite - How to install light strips
Trace the wire bundle up to a small black box. There are small clips on the side that press in to release the lid. The fuses are inside there. The two open spots are for the two leads. Hope the picture helps. Darren
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2021 EZGO Express L6 Elite Lithium Speed Upgrade | Lithium EZGO | |||
First cart owner ordering a new 2021 EZGO Express L6 Elite 3.0 , have some questions | Lithium EZGO | |||
2021 EZGO Express L6 Elite Best Accessories | Lithium EZGO | |||
1st cart, looking @ 2021 L6 Elite, Pros & Cons? | Electric EZGO | |||
wiring multiple LED light strips to 1 switch | Electric EZGO |