12-30-2017, 11:51 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 45
|
4" X 6" led headlights
I accidentally posted on ezgo forum so I'm reporting here. I was wondering if anyone had tried or thought about retrofitting these in a 1991 club car original headlight assembly?
Billy Alexander |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-31-2017, 06:10 AM | #2 |
Gone Broke
Join Date: Oct 2011
Location: Galveston, Texas
Posts: 1,592
|
Re: 4" X 6" led headlights
I have not use that particular brand, but I did use LEDs on a project that I am working on now how I was able to make those lights work was I cut a piece of metal strip roughly 6 in Long and drill the hole at each end of the strip, where you see the body of the club car there are two holes to attach the light to the body what I did, was Iran bolts through those holes and the holes of the metal strip to fasten the light in tightly, if I get a chance today I will take a picture of that particular set up and post it for you....
But yes you can make those lights work with no problem.... |
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 DS "bucks" or "jerks" at low speed... | Electric Club Car | |||
Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO | |||
One way to cure the "squirrel hunter" headlights | Electric EZGO |