|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-01-2011, 08:27 PM | #11 |
Getting Wild
Join Date: Sep 2010
Location: NE KS
Posts: 111
|
What is the best method known to man to unplug a clogged muffler?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-01-2011, 08:50 PM | #12 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: EZ-Go carburetor issues - very hard to start
|
06-02-2011, 07:33 AM | #13 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: EZ-Go carburetor issues - very hard to start
yes the old mufflar barbaque...................................
|
06-02-2011, 05:43 PM | #14 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: EZ-Go carburetor issues - very hard to start
BURN THAT SUCKER !!!! (Seriously, it's an amazing difference and it gives you a reason to drink a few cold ones around a nice fire!)
|
06-02-2011, 05:51 PM | #15 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: EZ-Go carburetor issues - very hard to start
BCM, where are the pics of the flames shooting out if it?
|
06-02-2011, 09:04 PM | #16 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: EZ-Go carburetor issues - very hard to start
I don't know - I thought they were on my Photobucket account but this is all I had, grrrrr (probably on the laptop or ?)
|
06-12-2011, 09:24 PM | #17 |
Getting Wild
Join Date: Sep 2010
Location: NE KS
Posts: 111
|
Did all the above - cooked muffler, had good fuel output from pump, cleaned out carb - still runs really crappy except at full revs. Needs choke pulled out to restart even when warm.... It used to start with 1/2" choke for the first 50' then run inhibited ....
|
06-13-2011, 08:35 AM | #18 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: EZ-Go carburetor issues - very hard to start
OK, I just reread the different parts of the thread, and I guess my question would be for you to describe "cleaned out carb" - there are several jets, etc in these 2-stroke carbs that are very prone to clogging and even one clogged port could be causing your troubles ... Maybe this will help, I circled all the "usual suspects"
|
06-13-2011, 10:02 AM | #19 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: EZ-Go carburetor issues - very hard to start
I also just reread the whole thread and didn't find an answer that you checked the compression or the crank seals.
Those are the basics and need to be confirmed before you go any further. |
06-13-2011, 02:02 PM | #20 | |
Gone Wild
Join Date: Oct 2009
Location: Manitoba, Canada
Posts: 363
|
Re: EZ-Go carburetor issues - very hard to start
Quote:
Thinking as per the other thread, if your crank seals are under a year old, they "should" be OK - check the vacuum line between the pump and the crankcase as well. One other note, instead of jack stands you can also pull the drive belt off with the cart sitting flat to do the WD-40 test. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
94 CC Hard to start | Gas Club Car | |||
Hard to start | Gas EZGO | |||
Hard to Start | Big Block Talk! | |||
Hard start | Gas EZGO | |||
Hard to start | Gas Club Car |