|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-21-2013, 03:04 PM | #21 |
Not Yet Wild
Join Date: Feb 2013
Location: Northwest Indiana
Posts: 18
|
Re: Engine Doesn't Match Frame Tag
OK,
Here is what I got... Cylinder is 2.954 after honing. Piston is 2.932 at the top edge of the piston (bottom arrow in photo) and through the Oil Port Section. Piston at the base is 2.950 (top arrow in photo) where the connecting rod pin is located, as well as at the extreme edge. . |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-23-2013, 04:09 PM | #22 |
Not Yet Wild
Join Date: Feb 2013
Location: Northwest Indiana
Posts: 18
|
Re: Engine Doesn't Match Frame Tag
OK, back together and no smoke.
Thanks to everyone for the help ! That is one off my "bucket list" I have the clutch tool if anyone needs to borrow it. |
03-23-2013, 10:13 PM | #23 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: Engine Doesn't Match Frame Tag
I would like to borrow your clutch tool. I'm located a little Southwest of you in IL. Is it for a rear clutch or driven?
|
05-16-2013, 04:12 PM | #24 |
Not Yet Wild
Join Date: Feb 2013
Location: Northwest Indiana
Posts: 18
|
Re: Engine Doesn't Match Frame Tag
Tonka,
Sorry, didnt get a notification that there was a reply. The tool is for the Engine Clutch. Let me know if you still need it. Chucker |
|
|
Similar Threads | ||||
Thread | Forum | |||
Broken Engine Rear Frame | Gas EZGO | |||
Diagram doesn't match what's there?! | Electric Club Car | |||
EZGO rear engine frame | Big Block Talk! | |||
2002 gsxr 1000 engine,banshee frame | Golf Carts and Parts |