|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-23-2014, 09:24 AM | #1 |
Not Yet Wild
Join Date: Mar 2014
Posts: 1
|
2014 efi
how do i tie open the gov.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-23-2014, 09:50 AM | #2 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi
|
03-23-2014, 09:51 AM | #3 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi
This isnt a efi cart but its a yamaha and it serves the same purpose. Just squeeze the spring as tight as you can and tighten the cable tie.
|
03-23-2014, 09:53 AM | #4 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi
Btw been speeking with mr don at plowmans and he is working on some performnace mods for the efi carts. Not sure when they will be available but will be worth the wait for sure.
|
03-23-2014, 09:17 PM | #5 |
Not Yet Wild
Join Date: May 2009
Location: Central Louisiana
Posts: 46
|
Just like DB shows. My FI with 22inch tires runs 21-22 mph like that.
|
03-23-2014, 09:44 PM | #6 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi
The fi guys just be carefull with zip tieing the governor all the way and taking the cart on ling extended wide open runs. The fi carts arent like a automobile that have o2 sensors to automatically adjust the amount of fuel needed when running at high rpms. You will end up running the cart lean and doing damage to the engine. Same idea goes for the carb carts at high extended rpms. This is the reason plowmans sells the jet kit and free flow air intake to eliminate the risk of running lean at high rpms. Months ago don did mention to me that he would have a fi controller to increase fuel as needed in the future sometime.
|
03-24-2014, 06:02 PM | #7 |
Not Yet Wild
Join Date: May 2009
Location: Central Louisiana
Posts: 46
|
Mine maxes out at 2800-3000 rpm with the governor zip tied. So far it is holding up great but the longest I have ran it like that is 1/2 a mile.
|
03-24-2014, 07:50 PM | #8 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi
Same here my 2013 carb maxes out at around 3000 rpms as well with the zip tie all the way tight. Gets to max speed fast but then you feel the governor kick back in.
|
03-24-2014, 07:52 PM | #9 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi
Hey specularius be sure to change your oil over to a good synthetic like mobil 1 10w 30 since you have zip tied your governor.
|
03-25-2014, 05:13 PM | #10 |
Not Yet Wild
Join Date: May 2009
Location: Central Louisiana
Posts: 46
|
I changed at 5 hours but I used Royal Purple.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2014 efi governor | Gas Yamaha | |||
4th annual CAW Rally ~ 2014 | Events and Places to ride | |||
2014 Camaro | Side x Sides/ATVs/Quads/Bikes/Jeeps/4x4's! | |||
2014 hybrid ez go / bad boy buggie | Gas EZGO |