|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-03-2012, 08:23 AM | #1 |
Not Yet Wild
Join Date: Mar 2012
Location: Pennsyvainia
Posts: 39
|
machined driven clutch
Has anybody had there clutch machined on a 2008 or newer st? Are there any adverse affects"belt wear or belt slipping off". Do I need to upgrade the belt these st's come stock with the double cogged belt. And how about the spring ezgo says these"work horse" stye buggies already have the heavy duty clutch, however it is quite dissapointing to me. Can secondary clutch machining be the miracle hill climbing answer I have been looking for?2008 ST 2+2 with kawasaki fj400 engine govenor turned up to 23 mph 20" trail wolf tires valves recently adjusted to .05 cold new spark plug installed new extreme duty double cogged belt still pushing it up the hill with no tire spin. Thank you in advance for any help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-31-2012, 07:14 AM | #2 |
Not Yet Wild
Join Date: Mar 2012
Location: Pennsyvainia
Posts: 39
|
Re: machined driven clutch
Found all my answers at www.erlandsontechnology.com they offer a great clutch kit
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Dive Clutch and Driven Clutch. Is this right?? | Gas EZGO | |||
Machined Sheave | Lifted Golf Carts | |||
FE 350 and CPP machined clutches - Need GONE! | Golf Carts and Parts | |||
FE 350 and CPP machined clutches! | Golf Carts and Parts |