|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-21-2018, 10:15 AM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 26
|
Input shaft identification
I recently purchased an alltrax controller and a motor. I went to install the motor and it wouldn't slide deep enough on the shaft I guess the shaft has a pilot shaft or snout on it. I called the company and they said they haven't seen that before so I sent them pictures and I guess they are doing research. Does anyone know what I have?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2018, 11:27 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Input shaft identification
Industrial axle. Like one of the biggest shuttles or something like that. This is usually found on models with the HD hydraulic brakes.
|
04-21-2018, 01:18 PM | #3 |
Not Yet Wild
Join Date: Mar 2018
Posts: 26
|
Re: Input shaft identification
Can i just cut the tip off?
|
04-21-2018, 01:21 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Input shaft identification
Yep, but be sure to grind the end flat & far enough to allow full engagement with the rubber bumper you should be adding. And leave a little bevel at the end of the splines.
|
04-21-2018, 03:24 PM | #5 |
Not Yet Wild
Join Date: Mar 2018
Posts: 26
|
Re: Input shaft identification
What rubber bumper?
|
04-21-2018, 04:44 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Input shaft identification
Yamaha part number for it is JH7-H1829-00-00. I don't know the Ezgo part number.
|
04-21-2018, 04:48 PM | #7 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Input shaft identification
Rubber bumper that goes in the spline shaft of the motor.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Input shaft ID | Electric EZGO | |||
EZGO Rear differential input shaft nut crimped? how to remove input shaft?! | Gas EZGO | |||
g16 input shaft | Gas Yamaha | |||
need input shaft for G2 | Golf Carts and Parts |