|
07-18-2018, 02:11 PM
|
#1 |
|
Getting Wild
Join Date: Jun 2018
Posts: 83
|
controller
i see quite a few problems with sevcon controllers having the same fault code 3 flashes,, if you read thru posts on here and other sites this is by far the most common fault,, supposed to be contactor or can be controller it self, just wondering could this be a programming problem instead of actual controller failure, must be some smart person that can tell you how to check ((without sending to sevcon))
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
| RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
| Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
| Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
| Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
Linear Mode
