2 wire ignition switch question

[Chris379]

Originally Posted by JohnnieB

In your cart, the small wire that connects to the solenoid's battery side large terminal on the page H-14 schematic goes to the reed switch in the charge receptacle. However, it can be attached to the battery pack's main positive terminal, or some other B+ source.

Ok, I understand. Currently it is attached to pack positive. So that is not my issue. Still trying to understand why my reverse buzzer only sounds when in forward.

[JohnnieB]

Originally Posted by Chris379

Ok, I understand. Currently it is attached to pack positive. So that is not my issue. Still trying to understand why my reverse buzzer only sounds when in forward.

Something is amiss with the microswitches on the F/R switch assembly.

In Forward, only one of the two should have a 36V output, in Reverse both have a 36V output.

[Chris379]

Update: Much time has gone by and I have just come to terms with my its issue and my fr switch reverse buzzer issue.

However now the cart does not move at all. I have solenoid click in both forward and reverse, however no movement. I know protocol is to start a new thread however with my cart already being a mess I feel there is valuable information contained in this thread that could be of help to someone interested in evaluating my situation.

What do you think?

[Mooncarter]

What is the voltage of the batteries?

[Chris379]

36.35v

[Doubles Shooter]

36.35 is 50% charged. You need to hook up the charger.

[Chris379]

Ok. I've had my charger on, maybe it stopped working. I'll update in a day or two. Thank you.

[Chris379]

I think charger is bad. After 2 days of charging the pack is still reading 36.35