|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-29-2020, 06:27 PM | #1 |
Not Yet Wild
Join Date: Mar 2019
Posts: 25
|
Upgrading motor but speed sensor connection is different
I am currently finishing the upgrade on my 2006 txt pds from 36-48v. I am installing the Admiral Mot B-4 but the speed sensor connection is different that the stock one that plugs into the J1 spot on the alltrax xct 500 is there a different cable I need or can I splice the wires from one to the other?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-29-2020, 06:32 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Upgrading motor but speed sensor connection is different
Splice the 3 wires together.
Red to Red Black to black 2 others together. Solder is and shrink wrap best. |
02-29-2020, 07:25 PM | #3 |
Not Yet Wild
Join Date: Mar 2019
Posts: 25
|
Re: Upgrading motor but speed sensor connection is different
thank you scottyb
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor Speed Sensor Issue | Columbia ParCar | |||
GE Motor Speed Sensor Rebuild | Electric Club Car | |||
add speed sensor to motor? | Electric EZGO | |||
D&D motor speed sensor. | Electric Club Car | |||
upgrading motor with existing speed resistor | Electric EZGO |