|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-11-2020, 06:53 PM | #1 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
2005 ez go can be pushed in run position
I have a 05 ez go and put new batteries in it. Still wasn’t working so the help from another person said it was the controller due to all the testing with a volt meter. Put a new controller on it and cart started running.
Couple hours later I place it in reverse and the cart jolts and doesn’t do anything. I kept it in run to see if I could move the cart and was able to push it without any issue. Any help would be appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2020, 08:16 AM | #2 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: 2005 ez go can be pushed in run position
So I unplugged the ten pin connector to the controller and it’s back up and running. Why would it need to be reset?
|
06-12-2020, 02:36 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2005 ez go can be pushed in run position
The controller contains a computer and computers get hung up in endless loops occasionally and have to be reset.
Sounds like you have PDS (sepex drive) cart. |
06-13-2020, 07:34 PM | #4 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: 2005 ez go can be pushed in run position
Yes it is a PDS. Thank you for the reply.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2005 MPT1000 solenoid clicks on and off when pedal is pushed | Electric EZGO | |||
Solenoid clicking to open position while pedal still pushed | Electric Club Car | |||
02 CC won't run unless pushed first | Electric Club Car | |||
05 Must be pushed to make it go | Electric Club Car | |||
g8 only goes sometimes when accelerator pushed | Gas Yamaha |