|
09-17-2015, 11:15 AM | #1 |
Not Yet Wild
Join Date: Sep 2015
Posts: 2
|
96' club car governor cable
I have a club car Ser#PG9645 with a FE350d engine. Once I mash the accelerator and governor engages carb it sticks WO and wont return. I think I need a new cable. All cable I looked up for a 96' are different than mine. The connections at least. Mine looks similar to the ones listed for the FE290 engines. My first cart and I don't know much about them. Where can I find correct cables. Thanks Allen
|
09-17-2015, 06:37 PM | #2 |
Not Yet Wild
Join Date: May 2015
Posts: 42
|
Re: 96' club car governor cable
you probably need the little return spring under the gold cover above the carb - that or the carb is worn out and sticking
|
09-18-2015, 01:31 PM | #3 |
Not Yet Wild
Join Date: Sep 2015
Posts: 2
|
Re: 96' club car governor cable
It has a return spring and if you take the cable off it returns just fine! I don't know how stiff cable should be.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2ga welding cable vs 2ga battery cable vs 2ga speaker cable | Electric Club Car | |||
84 cart throttle cable,linkage and governor concerns | Gas Club Car | |||
G16 governor cable issue?? | Gas Yamaha | |||
Engine racing/adjust governor rod/cable?? | Gas Club Car | |||
88 ezgo governor cable | Gas EZGO |