|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
|
|
02-19-2010, 11:08 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2009
Location: sw pa steelers/ pens country
Posts: 70
|
governor bypass
Repowering a 1988 club car with a gx390 , unsure on the governors i know there is one in the engine, was going to leave alone. the one on the rearend do i hook this up or bypass it. thanks.
|
|
|
|
02-19-2010, 11:14 AM
|
#2 |
|
Gone Wild
Join Date: Jun 2009
Location: Central PA
Posts: 336
|
Re: governor bypass
Just bypass the one in the rear. Mine is an ezgo and I just took the arm off and let the shaft there.
|
|
|
|
|
02-19-2010, 11:25 AM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2009
Location: sw pa steelers/ pens country
Posts: 70
|
Re: governor bypass
thats what i was thinkin didint know if the arm had to be ziptied in a certain position thanks
|
|
|
|
|
02-19-2010, 11:55 AM
|
#4 |
|
Raised by coyotes
 Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: governor bypass
I think most just use a spring. If you think about it, the mechanicals inside the differential are still working and moving the arm, it's just not connected to the throttle cable anymore. May not matter, but with a spring you won't bind anything in the diff, or break the tie.....
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Problem with governor bypass | Gas Yamaha | |||
| g1 governor bypass top speed | Gas Yamaha | |||
| Yamaha governor bypass | Gas Yamaha | |||
| ez-go governor bypass? | Gas EZGO | |||
| 82 G2 Governor Bypass | Gas Yamaha | |||
Hybrid Mode