big block?

kmanxj5050 · 12-03-2008, 08:53 AM

http://detroit.craigslist.org/grd/926359692.html

is this like what you guys use in your carts?

scottyb · 12-03-2008, 09:05 AM

Wish they did use those. They are everywhere for cheap...That is a verticle shaft. The drive shaft is on the bottom......They use a horizontal shaft on GC

kmanxj5050 · 12-03-2008, 09:29 AM

i see gotcha the shaft that the belt pulley would go on right?

kmanxj5050 · 12-03-2008, 09:32 AM

http://detroit.craigslist.org/grd/914677331.html

like this one? how much hp is a stock g1?

Boris · 12-03-2008, 10:22 AM

Welcome to the insanity kman ......... There is a G1 section where there is someone that can guide you with experience ........ That being said
Someone will correct me if I'm wrong ..... The stock G1 uses a 2stroke engine, and if it IS a 2stroke. You'll be the one selling your unusable stuff on craigslist.

TheNewGuy · 12-03-2008, 11:54 AM

On the stock G1 you don't have forward and reverse gears in the rear end. For reverse the 2 stroke engine runs backwards. If you install a 4 stroke engine you will not have reverse unless you also install a 4 stroke rear end.

kmanxj5050 · 12-03-2008, 02:21 PM

reverse wouldnt really matter to me lol how do i get to the g1 section i only see gas yamaha

TheNewGuy · 12-03-2008, 02:22 PM

Quote:

Originally Posted by kmanxj5050

reverse wouldnt really matter to me lol how do i get to the g1 section i only see gas yamaha

That would be the right section.

kmanxj5050 · 12-03-2008, 02:46 PM

oh ok yeah i posted in there

ok back to another question, how much hp does a freshly rebuilt g1 make (new crank, rod, piston, etc., estimated hp is fine). And what about if i made a custom exhaust with a muffler off a blaster (or something close) and a better flowing filter (probably UNI) and jets(i havent seen any jets for a g1) even on CPP but from some things ive read on here he can get things that he doesnt have listed on his site.

just asking this question here because of a lack of answers in the yammy section

12-03-2008, 08:53 AM	#1
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36	big block? http://detroit.craigslist.org/grd/926359692.html is this like what you guys use in your carts?
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36

12-03-2008, 09:05 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: big block? Wish they did use those. They are everywhere for cheap...That is a verticle shaft. The drive shaft is on the bottom......They use a horizontal shaft on GC

12-03-2008, 09:29 AM	#3
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36	Re: big block? i see gotcha the shaft that the belt pulley would go on right?
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36

12-03-2008, 09:32 AM	#4
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36	Re: big block? http://detroit.craigslist.org/grd/914677331.html like this one? how much hp is a stock g1?
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36

12-03-2008, 10:22 AM	#5
Boris DELETED Join Date: Mar 2008 Posts: 1,025	Re: big block? Welcome to the insanity kman ......... There is a G1 section where there is someone that can guide you with experience ........ That being said Someone will correct me if I'm wrong ..... The stock G1 uses a 2stroke engine, and if it IS a 2stroke. You'll be the one selling your unusable stuff on craigslist.
Boris DELETED Join Date: Mar 2008 Posts: 1,025

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-03-2008, 11:54 AM	#6
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,047	Re: big block? On the stock G1 you don't have forward and reverse gears in the rear end. For reverse the 2 stroke engine runs backwards. If you install a 4 stroke engine you will not have reverse unless you also install a 4 stroke rear end.
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

12-03-2008, 02:21 PM	#7
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36	Re: big block? reverse wouldnt really matter to me lol how do i get to the g1 section i only see gas yamaha
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36

12-03-2008, 02:46 PM	#9
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36	Re: big block? oh ok yeah i posted in there ok back to another question, how much hp does a freshly rebuilt g1 make (new crank, rod, piston, etc., estimated hp is fine). And what about if i made a custom exhaust with a muffler off a blaster (or something close) and a better flowing filter (probably UNI) and jets(i havent seen any jets for a g1) even on CPP but from some things ive read on here he can get things that he doesnt have listed on his site. just asking this question here because of a lack of answers in the yammy section
kmanxj5050 Not Yet Wild Join Date: Dec 2008 Posts: 36

Similar Threads
Thread	Forum
why just 1 big block b&s how about 4	Videos
To big block or not to big block	Big Block Talk!
I need a big block	Gas Club Car
big block	Gas Yamaha