|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
08-24-2011, 04:35 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2011
Posts: 8
|
Brake light switch
Wiring a single switch for brake lights on a 02 48v DS series cart. Is it OK to wire the brake switch to the ignition switch to make sure the brake lights go off when the parking brake is applied?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-24-2011, 08:18 PM
|
#2 |
|
revolutiongolfcars.com
 Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,171
|
Re: Brake light switch
No... The ignition switch operates on a 48V current. You'll need to install a 48Volt relay and switch it on and off by the keyswitch. Then run your 12V wire across the contactor posts of the relay and then to your brake limit switch.
|
|
|
|
|
08-24-2011, 09:32 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: Brake light switch
you could swap your ignition switch for a DPST switch.
or add a timer circuit or put an additional switch on the parking brake to break the circuit. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| brake light switch | Electric Club Car | |||
| Brake light switch | Electric Club Car | |||
| Brake light switch install | Gas EZGO | |||
| Brake light switch | Electric Club Car | |||
| Brake light switch | Gas Yamaha | |||
Linear Mode
