installing lift kit

[mortimer]

Can someone give me a pic or explain a bit about how the rear end should be put together. My cart is an "86 DS. The directions are a bit sketchy for the rear. I have the springs above the rear end and am ready to bolt it back together. I am confused on how the big U-bolt fits. And do I use the old u-bolts to clamp the rear end to the frame again? A pic would be awesome if anyone has this type of kit. The same kit is here on e-bay.
http://cgi.ebay.com/6-Spindle-Lift-K...item19bdab2822
The front was easy but am confused on how the rear fits together.
Please help.

[clubcar810]

on my jakes the leaf when on top of the lifting blocks that came with the kit!! so should be the same concept! shouldnt need to use old ubolts

[golfcarwop]

the rear end should sit on the bottom of the lift blocks and the springs on the top, and the new hold down on top of the spring with the old hold down w/brake slot on the bottom of your rearend, use the new u-bolts, you may have to widen the holes in the old hold down to fit the new u-bolts and then tighten it all back up

[lockman1]

Pictures are worth a thousand words....
(Not the same years, or kits, but it's relatively the same)



My 07, Before:




My 07, After:



And here's a pic of my buddies 94:

[mortimer]

Mine is just like the '94. Thanks a ton!
And with new monroe shocks #33049, no need for extensions. They fit perfectly.

[mortimer]

Oh, yeah. That's for a 6 inch lift kit.

[claymoore73]

Lifesaver! Thanks for the pics. I have been staring at my lift kit trying to figure out how it goes on. No instructions came with it.