|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-15-2012, 10:00 PM | #1 |
Not Yet Wild
Join Date: Oct 2012
Location: Kentucky
Posts: 7
|
Yamaha G2 throttle question
I am in the process of converting a 1987 Yamaha G2 E from resistor coil to solid state. I've been looking into goin with an Ezgo system with a PB-6 pot box with a Curtis controller 275 amp. I was wondering if this system will work with the stock motor, f/r switch and solenoid. Also, I was wondering what is the best way to hook up the pot box to the accelerator pedal linkage. I am familiar with this Ezgo system beings I have an Ezgo marathon that I converted from resistor to solid state. Any help is greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-15-2012, 10:23 PM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Yamaha G2 throttle question
Poor, this is a gas Yamaha section, unless Smallblock see's this (which he probably will, he see everything). Nobody here is smart enough ta know what your talkin about!! I'd go to the Yamaha elect. section!
|
10-16-2012, 07:39 AM | #3 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: Yamaha G2 throttle question
|
|
|
10-16-2012, 09:16 AM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Yamaha G2 throttle question
I agree, would be better posted in the Yamaha electric section,but YES the Curtis controller and PB-6 potbox would work great in your G2e. I've done several. Wont be a speed deamon, but very smooth and relaiable and quite easy to install. Good luck
|
10-16-2012, 05:47 PM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Yamaha G2 throttle question
Nobody but the "main man" Dave!! Thanks for all you do here Dave!!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
10-16-2012, 05:51 PM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Yamaha G2 throttle question
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
10-16-2012, 06:26 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Yamaha G2 throttle question
|
10-16-2012, 06:27 PM | #8 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Yamaha G2 throttle question
|
10-17-2012, 07:35 AM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Yamaha G2 throttle question
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
10-17-2012, 08:58 AM | #10 |
Not Yet Wild
Join Date: Oct 2012
Location: Kentucky
Posts: 7
|
Re: Yamaha G2 throttle question
Thanks guys I didn't realize this was the gas section
|
|
|
Similar Threads | ||||
Thread | Forum | |||
yamaha g2 bogs at half throttle through full throttle | Gas Yamaha | |||
Throttle box question | Electric EZGO | |||
Throttle Question | Electric EZGO | |||
Yamaha g16 only runs full throttle | Gas Yamaha | |||
Question about throttle mechanism .. | Gas EZGO |