|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-18-2019, 01:39 PM | #1 |
Getting Wild
Join Date: Aug 2012
Posts: 97
|
Powerwise control board.
The old control board had part no. 28126-G03 on it and looked like the first pic. When I ordered a replacement for that board it looked like the second pic. Os this correct? Is this a proper replacement? How do I hook this up?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-18-2019, 01:55 PM | #2 |
Gone Wild
Join Date: May 2019
Location: Georgia
Posts: 389
|
Re: Powerwise control board.
Yes sir, there was an upgrade several years ago, either follow the instructions or the instructions were on the internet. Change out several over the years with no issue
|
10-18-2019, 02:00 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Powerwise control board.
The original control board was two pieces. The board in your first picture is called the "power input" board and the other half is between the heatsink and front panel.
The new board you have is a one piece control board and replaces both of the original two piece system. Attached are the instructions for installing the new system and a service manual for the PW 28115 charger. |
10-18-2019, 02:26 PM | #4 |
Getting Wild
Join Date: Aug 2012
Posts: 97
|
Re: Powerwise control board.
Thank you gentlemen, I appreciate it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Retro Powerwise board in a Powerwise II | Electric EZGO | |||
Powerwise Bad Board | Electric EZGO | |||
johnnieb & scottyb ? Powerwise control board | Electric EZGO | |||
36v Powerwise Charger Control Board | Electric EZGO | |||
Control board arcing on '87 | Electric EZGO |