Convert a TXT 1997 36 v to 48 v

whiting101 · 11-27-2019, 08:41 PM

Quote:

Originally Posted by JohnnieB

All of the cables need to be upgraded to at least 4Ga. Total of ten cables for a DCS or PDS. Need the two to the A1 & A2 terminals on the motor and the sorts one between solenoid and controller. (The stock F1/F2 cables are okay if the insulation isn't worn and the connectors are in good health.)

Thanks, JohnnieB, that'll give me something to work on this winter.

Great info.

Sent from my SM-G892A using Tapatalk

JohnnieB · 11-28-2019, 10:45 AM

Oops! That should have been short one between solenoid and controller, rather than sorts one.

whiting101 · 11-28-2019, 11:07 AM

Quote:

Originally Posted by JohnnieB

Oops! That should have been short one between solenoid and controller, rather than sorts one.

I understood [emoji106]

Sent from my SM-G892A using Tapatalk

11-28-2019, 10:45 AM	#12
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Convert a TXT 1997 36 v to 48 v Oops! That should have been short one between solenoid and controller, rather than sorts one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Convert 36v to 48v help	Electric EZGO
OK- how bad would it be to convert a Bad boy to	Electric EZGO
Convert	Electric Club Car
1997 EZGO gas 1997 not firing	Gas EZGO
Should I Convert to 48V	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum