Ezgo pds tow/run switch

georgia088 · 03-29-2020, 10:34 AM

Hello. My tow/run switch is bad. Until I get the new switch, how can I bypass it with the four wires? My colors are orange, red, white, and yellow. I have an alltrax dcx controller. Thanks for the help!

kgsc · 03-29-2020, 11:49 AM

See attached

georgia088 · 03-31-2020, 06:50 AM

Thanks! So, is the red wire and the white wire supposed to have pack voltage? And when switched it supplies pack voltage to the other two wires? Thanks!

03-29-2020, 10:34 AM	#1
georgia088 Gone Wild Join Date: Jul 2012 Posts: 527	Ezgo pds tow/run switch Hello. My tow/run switch is bad. Until I get the new switch, how can I bypass it with the four wires? My colors are orange, red, white, and yellow. I have an alltrax dcx controller. Thanks for the help!
georgia088 Gone Wild Join Date: Jul 2012 Posts: 527

03-31-2020, 06:50 AM	#3
georgia088 Gone Wild Join Date: Jul 2012 Posts: 527	Re: Ezgo pds tow/run switch Thanks! So, is the red wire and the white wire supposed to have pack voltage? And when switched it supplies pack voltage to the other two wires? Thanks!
georgia088 Gone Wild Join Date: Jul 2012 Posts: 527

Similar Threads
Thread	Forum
EZGO Ignition Switch Help (where to connect hot wire on Radio to Ignition Switch)	Gas EZGO
Ezgo RXV Run/Tow Switch	Electric EZGO
EZGO ST 4x4 Switch on PDS Key Switch Plate	Electric EZGO
97 ezgo tow ,run switch	Electric EZGO
Ezgo 3 way switch on ds?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum