|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-04-2020, 10:12 AM
|
#1 |
|
Gone Wild
 Join Date: Feb 2020
Location: Naples FL
Posts: 461
|
need alltrax codes for the XCT48500 controller
just installed it yesterday and it was great, took my second ride today and when I stopped and backed up to open the gate it would only shudder and move a few inches, powered it off and on and got one green and two red flashes an now my dog is looking at me like I just destroyed his toy. LOL
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-04-2020, 11:13 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 461
|
Re: need alltrax codes for the XCT48500 controller
well it looks like the throttle or the wiring to it is the suspect. the shuddering was caused by the voltage coming through the diode but there wasn't any voltage to the solenoid to energizer it. I guess I need to find a throttle and or harness in order to bullet proof this
|
|
|
|
|
04-04-2020, 12:07 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: need alltrax codes for the XCT48500 controller
TXT has a 4 wire connector between the pedal box and the controller. It is a notorious corrosion spot. Clean or replace the connector. GL & SF
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| ALLTRAX XCT48500 USED 2 Months | Golf Carts and Parts | |||
| Alltrax XCT48500-DCS Programming for 1996 EZGO TXT, 36V DCS | Electric EZGO | |||
| Alltrax XCT48500-DCS problem | Electric EZGO | |||
| 03 pds with alltrax xct48500 no power | Electric EZGO | |||
| Alltrax XCT48500 YDRE | Announcements | |||
Linear Mode
