How to stop reverse beep?

[Buck9s]

How do I stop my cart from having a beep/alarm in reverse?

I recently got my first cart, 2015 TXT T48 with a 2" lift, 12" street tires, custom seats, ... but standard electronics and motor. When it was delivered there was no reserve beep. Over the weekend I disconnected the battery to wire up some signals and a dash volt meter and when I hooked everything back up the reverse beep was there. It's a single, long beep.

Please help me make it go away, it's just annoying enough to drive me nuts.

[Lochlin]

I don't know your specific cart but getting the beep to stop should be as simple as disconnecting one of the wires going into it.

A bigger question is what made the beep start after your work to begin with. I can't offer much there, unfortunately.

[bronsonj]

If it were me, I'd put a piece of electrical tape over the beeper. That's what I did 4 years ago. I like knowing the cart is in reverse but the beeper is too dang loud. The electrical tape cut the volume on half. Maybe more.

[Robbiecaud]

Thanks for the electrical tape trick. I’m going to try that.

[mikeb33]

Originally Posted by bronsonj

If it were me, I'd put a piece of electrical tape over the beeper. That's what I did 4 years ago. I like knowing the cart is in reverse but the beeper is too dang loud. The electrical tape cut the volume on half. Maybe more.

I did this last weekend. Much quieter, but nice to still know I'm in reverse.

[SelfControl30]

On my 2017 EZGO txt I unscrewed the plate on the dash that the key switch is mounted too and the reverse beeper is mounted behind it. I unplugged the wire and that stopped my beeper.