|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-11-2016, 09:44 AM | #11 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Re: PDS/Key Switch/Won't Go
What solenoid do I need to order from you? Alltrax 400 controller/36volt. If I still have my old stock solenoid should I throw it on there just to see if it will make cart run? I understand they will run with an Alltrax 400 but just won't hold up? Is that correct?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-11-2016, 10:15 AM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: PDS/Key Switch/Won't Go
The Alltrax 400 requires a 200a solenoid. Use SW180 with magnetic breakouts for best results... Also have you cut off and discarded the lower 2/3 of the environmental cover for proper cooling?
|
05-11-2016, 10:37 AM | #13 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Re: PDS/Key Switch/Won't Go
I removed the cover.
|
05-11-2016, 12:26 PM | #14 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: PDS/Key Switch/Won't Go
Good man
|
05-11-2016, 12:50 PM | #15 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Re: PDS/Key Switch/Won't Go
|
05-11-2016, 12:54 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: PDS/Key Switch/Won't Go
Yes got to the bottom of the page here > http://www.cartsunlimited.net/solenoids.html
And look for this : |
05-11-2016, 07:00 PM | #17 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Re: PDS/Key Switch/Won't Go
Thanks, I'll be ordering soon.
|
05-28-2016, 12:34 PM | #18 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Re: PDS/Key Switch/Won't Go
UPDATE: Brakes were frozen up from sitting last year with the parking brake pressed. Ordered the solenoid and was planning on switching everything out. Tried to roll cart around to front of house for ease of working on but cart wouldn't budge. Then it hit me, brakes are stuck. I even brought my stock controller and solenoid in case I had to switch it all back out but fortunately it was only the brakes. I still have the problem of it running without the key switch even being connected but I will address that later after the storm passes through.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Pull switch/foot switch voltage | Electric Club Car | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |