|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-25-2018, 08:23 AM | #1 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
RXV moves very slow
I have an RXV in the shop and I am not very familiar with them. The cart will move at about 1mph if that. You can hear the motor spinning and if you put it on jack stands you can almost hold the hub while pushing the throttle pedal.
At first I thought it was stripped hubs, they are loose, and need to be replaced but I don't think that is the bigger issue. Input shaft maybe the issue? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-25-2018, 08:27 AM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,234
|
Re: RXV moves very slow
Could be the encoder.
|
06-25-2018, 08:31 AM | #3 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,234
|
Re: RXV moves very slow
What year and what controller?
Do you have a handheld for it? |
06-25-2018, 09:25 AM | #4 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: RXV moves very slow
It is a 2008. It says ACD motor controller.
I only have a Curtis handheld. |
06-25-2018, 10:33 AM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV moves very slow
There is a 2 wire plug that goes Into the motor (not the one for the brake). Ohm test the motor side of that plug, should read between 400 and 1300 ohm. This is the motor temp sensor. Let's rule that out first since it's easy to test.
|
06-25-2018, 05:19 PM | #6 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: RXV moves very slow
ohm'd at 634
|
06-25-2018, 10:51 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV moves very slow
Then we are pretty much back to encoder as likely cause.
|
06-26-2018, 08:03 AM | #8 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: RXV moves very slow
Where is the best place to buy the Encoder? I am not seeing it in the Redhawk catalog.
|
06-26-2018, 08:24 AM | #9 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,234
|
Re: RXV moves very slow
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need help 48 volt moves slow | Electric Club Car | |||
RXV moves very slow | Electric EZGO | |||
ezgo moves slow | Electric EZGO | |||
89 club car moves slow in forward and barely moves in reverse | Electric Club Car | |||
Cart moves slow then nothing | Electric Club Car |