|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-21-2020, 08:58 AM | #1 |
Not Yet Wild
Join Date: Apr 2015
Posts: 71
|
Custom Forward/Reverse (FNR) Switch
I am about to stretch my 2014 Precedent and want to install a custom fnr switch on a sentry dashboard. Does the fnr switch need to be rated for 48v, or more precisely, the battery pack voltage? I want to replace the old school light switch and such so they all match. Something like the picture below.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-21-2020, 11:16 AM | #2 | |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
Re: Custom Forward/Reverse (FNR) Switch
Quote:
It is providing an input to the controller as to what the operator wants to do. Most switches have ratings for the amps it can handle at different voltages. I would think any switch could handle the FNR function. If the switch is internally back-lit it would need to be 48v compatible. |
|
07-21-2020, 01:12 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Custom Forward/Reverse (FNR) Switch
If You are thinking in have a Carling Contura ON-OFF-ON type switch in that panel to function as FNR, You will need a DPDT 10 terminal switch with two independent lights like a VJD2-UXXB model.
You would use one side/pole for the Controller FNR function and the other side to toggle the corresponding 12v LED light. You would need to order a custom actuator cover separately (about $10) , but that also allows you to customize the words and graph for each direction. |
07-21-2020, 01:22 PM | #4 |
Not Yet Wild
Join Date: Apr 2015
Posts: 71
|
Re: Custom Forward/Reverse (FNR) Switch
Thanks guys.
@Sergio - So even though the switch is rated for 12v 20amp, it will work? I measured 48v coming into the switch when I put it in Forward. Here is model VJD2-UXXB as you suggested. https://newwiremarine.com/product/on...dpdt-blue-led/ Nominal voltage: 12Vdc Current Rating: 20A Terminals: 10 Carling P/N: VJD2-UXXB Lamp Type: Blue LED Lamp Life: 100,000 hours |
07-21-2020, 02:08 PM | #5 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Custom Forward/Reverse (FNR) Switch
Yes it will work fine, as long as You don't exceed the switch maximum power rating (Voltage x amps), any 12v switch will work for this purpose.
Here is another source that also sells the custom actuator covers: https://rockerswitchpros.com/product...itch-actuator/ I was thinking a Layout #3 with an UP arrow symbol and FWD in line #1 for the Top and a DOWN arrow symbol and REV in line #4 for the bottom. There are lots of places that sell those type of switches, just make sure it has the 2 poles and independent lights so it will be easier to use 12v for the lights and 48V for the FNR |
07-21-2020, 02:17 PM | #6 |
Not Yet Wild
Join Date: Apr 2015
Posts: 71
|
Re: Custom Forward/Reverse (FNR) Switch
Thanks. I came across the same website and had the same idea you did. No I just need all my other parts to come in so I can assemble the cart!
|
07-21-2020, 06:25 PM | #7 |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
Re: Custom Forward/Reverse (FNR) Switch
|
07-21-2020, 06:47 PM | #8 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Custom Forward/Reverse (FNR) Switch
Absolutely, I have some bright leds on my cart, it helps backing up at night.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Changing keyed Forward/reverse switch to rocker switch | Electric EZGO | |||
EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
custom forward reverse switch. | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |