|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2021, 03:18 PM | #11 |
Gone Wild
Join Date: Nov 2015
Posts: 479
|
Re: EZGO PDS Troubleshooting
Everything I’m reading tells me what should happen when solenoid clicks. Am I right to assume that the controller is not doing what it should to make it click?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2021, 03:22 PM | #12 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO PDS Troubleshooting
Quote:
Post#3 also said there was pack voltage on both of the small terminals. That indicates B+ is getting to and through the solenoid coil. All that is now needed to energize the solenoid is for the controller to apply B- to the blue wire on one of the solenoid's small terminals. The controller is told to do that by the pedal switch putting B+ on J4 Pin-1. You are getting B+ on J4 Pin-1 when the pedal is pushed, so the controller is being told to energize the solenoid, but is not doing what it is being told to do. Therefore the controller is bad. Replace it with an Alltrax XCT48400-PDS controller. |
|
09-26-2021, 03:48 PM | #13 |
Gone Wild
Join Date: Nov 2015
Posts: 479
|
Re: EZGO PDS Troubleshooting
Thanks Johnnieb
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Troubleshooting | Electric EZGO | |||
Ezgo troubleshooting | Electric EZGO | |||
Ezgo-txt troubleshooting question | Electric EZGO | |||
Ezgo ITS Troubleshooting | Electric EZGO | |||
EZGO TXT Troubleshooting | Electric EZGO |