|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-08-2022, 08:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2022
Posts: 3
|
Space between Spindle and Frame?
Hi All,
I'm new to the forum, just getting started working on my Ezgo Marathon and could use some wisdom... I have a 1992 Ezgo Marathon 36v that I'm installing a 4" drop-axle lift on. I've started re-installing the front wheel spindles and noticed there's a good gap between the spindle assembly and the axle mount. I have the thrust washer and 7/8" washer on top of the spindle as shown in the assembly manual. Is this normal, or should I put another washer on the top or bottom of the spindles to tighten it up? Pics attached |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-09-2022, 02:59 PM
|
#2 |
|
Not Yet Wild
Join Date: Mar 2022
Posts: 3
|
Re: Space between Spindle and Frame?
Anyone have anything? I saw someone asked the same question a few year back but didn't get a response either.
Should I put in a washer to take out the play in the spindle? |
|
|
|
|
03-09-2022, 06:31 PM
|
#3 |
|
Gone Wild
 Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: Space between Spindle and Frame?
If you have play in a steering component, that can't be good. I'd put a washer in it to take away any slop.
|
|
|
|
|
03-10-2022, 06:45 AM
|
#4 |
|
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 2,000
|
Re: Space between Spindle and Frame?
I've had some play on both sides of my RXV and this were fixed with an extra washer on the bottom side of the spindle
 |
|
|
|
|
03-10-2022, 07:33 AM
|
#5 |
|
Not Yet Wild
Join Date: Mar 2022
Posts: 3
|
Re: Space between Spindle and Frame?
Awesome! Thanks guys!
 Yeah, I just wanted to be sure that was an OK route and I wasn't missing something. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1993 Marathon - brake spindle to axle spindle | Electric EZGO | |||
| Drop frame lift or Spindle lift? | Electric EZGO | |||
| no space | Lifted Golf Carts | |||
| Does anyone know how far to space a magneto? | Gas Club Car | |||
| To Space or not toSpace? | Lifted Golf Carts | |||
Linear Mode
