|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
02-03-2013, 03:46 PM
|
#1 |
|
Not Yet Wild
 Join Date: Aug 2012
Location: New Castle, Pa.
Posts: 33
|
Welding on frame
I need to add a couple brackets to the frame of my 2007 pds, do I need to disconnect the electronics (to protect them) before welding, or will just switching to tow mode do the job? If disconnecting is necessary, what all needs to be done. Thanks in advance for any help.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-03-2013, 03:57 PM
|
#2 |
|
Gone Wild
Join Date: Aug 2010
Location: Marion, Ohio
Posts: 1,391
|
Re: Welding on frame
Yes. Disconnect the ground from the battery and attach the welder's ground is as close to the work area as possible.
|
|
|
|
|
02-03-2013, 04:28 PM
|
#3 |
|
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Welding on frame
I would unplug the controller as well,just to be safe.I've seen CDI-boxes fry even with the Ground unhooked.Hope this helps.
 |
|
|
|
|
02-03-2013, 04:29 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Welding on frame
Flip the run/tow switch to TOW before you disconnect the battery pack, then remove both main + and - just to be safe and flip the toggle back to RUN after the battery pack has been reconnected.
|
|
|
|
|
02-03-2013, 05:12 PM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2012
Location: New Castle, Pa.
Posts: 33
|
Re: Welding on frame
thanks for all the help, you guys are the best!!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZ GO frame welding question | Electric EZGO | |||
| Will Welding.... | Electric Club Car | |||
| Welding on a 350? | Gas EZGO | |||
| welding on the frame ? | Electric EZGO | |||
Linear Mode
