|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-01-2017, 02:04 PM
|
#1 |
|
Gone Wild
 Join Date: Jan 2017
Location: venice
Posts: 1,807
|
So I bought G1 "scorched earth"
Picked this up for parts today and named her accordingly. The frame is shot! And it's a j17 to top it off.....
 Has the top frame I wanted, was hoping the dang thing had hand rails. Still need to find a good exhaust and a primary |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-03-2017, 01:11 PM
|
#2 |
|
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: So I bought G1 "scorched earth"
Picked clean. Man this thing was roached. shocks leaking oil, holes in the frame and swing arm. the rear bumper mounting had rotted off and they made a decent bracket and remounted it, if I had torches id probably have cut off.
got some replacement front end parts my g1 may need when I straighten out the home made lift situation. looks like the coil wires had rubbed and grounded out, all melty looking. terrible to say I cant test compression as I lent out my tester. I am going to use the front cowl as mine has been cut into for headights that are in rough shape. |
|
|
|
|
08-10-2017, 04:15 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2016
Location: San Diego
Posts: 50
|
Re: So I bought G1 "scorched earth"
Hey we're you talking about the rails on the side and back of the seats? If so pm me in the process of parting one out to.
|
|
|
|
|
08-10-2017, 07:40 PM
|
#4 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: So I bought G1 "scorched earth"
You need a sawsall, I have a $30 one and with good blades I can chop up 1/4" steel. Tubing is no problem once you get the hang of running one. They can be very handy.
Wow is that poor thing rusty! |
|
|
|
|
08-11-2017, 04:04 PM
|
#5 |
|
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: So I bought G1 "scorched earth"
ive got a Ryobi I use time to time, but I just drug the thing to the end of the drive way on trash night. A scrapper came by and picked it up
|
|
|
|
|
08-12-2017, 01:27 PM
|
#6 | |
|
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: So I bought G1 "scorched earth"
Quote:
|
|
|
|
|
|
08-12-2017, 07:59 PM
|
#7 |
|
Not Yet Wild
Join Date: Nov 2016
Posts: 3
|
Re: So I bought G1 "scorched earth"
I'll buy the motor off you.
|
|
|
|
|
08-12-2017, 10:24 PM
|
#8 |
|
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: So I bought G1 "scorched earth"
I tried a compression test and it was all over the place. At this point the condition is unknown until I get time to dig deeper. This thing was rough had I paid better attention I should have paid less.
|
|
|
|
|
08-14-2017, 10:44 AM
|
#9 | |
|
Not Yet Wild
Join Date: May 2016
Location: San Diego
Posts: 50
|
Re: So I bought G1 "scorched earth"
Quote:
Here's some pics of the rails   Sent from my iPhone using Tapatalk |
|
|
|
|
|
08-14-2017, 11:02 AM
|
#10 |
|
Not Yet Wild
Join Date: May 2016
Location: San Diego
Posts: 50
|
Re: So I bought G1 "scorched earth"
I just put the comet duster 94c in and is working good so far. If you lift your cart it will clear the frame with the cover off.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Big "thank you!" to JohnnieB and Yurtle, was "EZGO TXT Non-PDS Help/Questions" | Electric EZGO | |||
| Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
| Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO | |||
| Just Bought the "Everything Carts Lift Kit for DS" | Lifted Golf Carts | |||
| Just bought a 2011 EZGO RXV all "murdered out" | Electric EZGO | |||
Linear Mode
