2012 Club Car dead pedal in Forward

[kenv]

Brand new to the forum. First post since the cart has never failed in 5 years..I've got a 2012 Club Car Strech. The pedal is dead in Forward. No movement, no click, no noise. When I put it into N...the engine fires up. When I move it to Reverse, the buzzer goes on and the engine will fire and the cart will move backward like normal. Is this a bad Micro switch or am I looking at something else. I'm not too cart or gas engine savy, but I will get dirty to trace down the issue. Any help would be appreciated. Thanks

[ReelTight]

Sounds like the contact at the FNR is not connecting. On my 95 it's just some metal tabs that can bend and/or twist out of position. I'm sure its a little different on a 2012 but same concept.

[Springbok]

Check the little yellow cam on the back side of the shifter (lift up the seat to access it). Sounds like a micro switch isn't getting tripped.

[Springbok]

Here's the backside of the shifter on an older cart. The newer ones look pretty similar I believe. If the shifter cable is misaligned, causing that little yellow cam to not trip that first micro switch when you're in gear, you will have a dead pedal:

(that second micro switch with the broken tab is just the switch that triggers the reverse buzzer, which I'd rather not have anyway...)

[lockman1]

Welcome to BGW kenv!

We know you have a 2012 Club Car stretch... however, a model name might help a little more.

Precedent?
Carryall/XRT?

[Springbok]

Update, kenv?

[kenv]

Sorry....I was out for the holidays. Based on the pic above....mine is making a connection. I don't see the tab not touching. It's pushed in. That's what is stumping me. Also...Don....It is a 2012 Gas Precedent...stretched brand new out box by CKD carts in Baytown, Texas. I know the engine is a Kawasaki. Thanks for all the replies so far. I'm not too golf cart savvy....and I sure appreciate any advice on this. Ken