|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-25-2018, 08:50 PM | #1 |
Not Yet Wild
Join Date: Nov 2018
Posts: 4
|
'03 EzGo/Cush runs then Governor kicks in.
This thing will run a dog then once high RPMs reached the stupid Governor kicks in and Power drops. The clutches open and close fine , from what I see. I hold the peddle down, the engine will Rev high and then this stupid Gov junk kicks in and Power drops. I've tried disconnecting different linkage pieces for the governor but it won't disable it. I'm not sure if, I need to adjust throttle going to the governor or What. It's driving me crazy. The manufacturer told me that due to Liability issues, they couldn't help.
But a different post solved the oil in the air box and I am thankful for that. It's an '03 6 person shuttle with robins Eh35c engine. I am almost on the verge of committing Golf Cart abuse by way of shotgun. Thanks for the Air Box tip. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-26-2018, 06:30 AM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: '03 EzGo/Cush runs then Governor kicks in.
That's what governors do to keep from exploding these little motors. There is a spring on top the rearend where you can tighten the nut to delay the governor from kicking in.... don't go overboard.
http://www.buggiesgonewild.com/ezgo-...4-strokes.html |
11-26-2018, 12:40 PM | #3 |
Not Yet Wild
Join Date: Nov 2018
Posts: 4
|
Re: '03 EzGo/Cush runs then Governor kicks in.
Thanks for the reply, It's been messed with before I purchased it. I guess just more patience and time trying to correct it. Appreciate the help.
|
11-26-2018, 12:46 PM | #4 | |
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: '03 EzGo/Cush runs then Governor kicks in.
Quote:
These engines were not built for high rpm! You can up the rpm some and be ok. but if you go too far or do away with it. It will come apart!! You got to PAY to PLAY. LOL |
|
11-26-2018, 06:25 PM | #5 |
Not Yet Wild
Join Date: Nov 2018
Posts: 4
|
Re: '03 EzGo/Cush runs then Governor kicks in.
10-4 hate to sound like Columbo but one more Question..
IF someone , not me, messed with the linkage for the carburator and the ones dealing with the governor, this will also effect MY current headache. I say this because, I have turned turned the Gov spring in and out. It has effected the Gov but it either cuts out way to fast or nothing. Or is there still a sweet spot to find Any further advice that would is GREATLY APPRECIATED. |
11-28-2018, 07:03 PM | #6 |
Not Yet Wild
Join Date: Nov 2018
Posts: 4
|
Re: '03 EzGo/Cush runs then Governor kicks in.
Thanks for the advice Stove and Gear. I believe abit more tinkering with the linkage between the Governor and carburator, I might have. Currently I have it to the point where it not kicking in, maybe Abit more tinkering. At least now my kids can have a little fun.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 Elec EZGO runs great, dies, turn key off and on and runs great 2 mins apart | Electric EZGO | |||
G2 only runs wide open! Governor? | Gas Yamaha | |||
1975 ezgo starts and dies when clutch kicks in, | Gas EZGO | |||
48 v charger kicks off | Electric Club Car | |||
After the charger kicks off . . . ??? | Electric EZGO |