|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-30-2018, 04:28 PM | #1 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
pre-mci rocker shaft end cap
does anyone know what kind of cap goes in the end of the rocker shaft of the head on a 295
mine is missing and need one or need to make something work almost like a freeze plug |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-30-2018, 05:24 PM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
|
Re: pre-mci rocker shaft end cap
There shouldnt be much tension on that, but good luck finding one! You could probably use a freeze plug if you can find the right size. If not, maybe tap the hole, and use a short bolt with a little teflon tape on the threads?
Maybe see if someone here has a parts motor. Or call your local dealer many times theyll have core or junk engines laying around you can scrounge parts from |
11-30-2018, 05:50 PM | #3 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: pre-mci rocker shaft end cap
yea going to go and see what size hole it is and see if I can't find a freeze plug that works if I can't find one soon
the small parts that didn't come with the big parts i bought are adding up |
12-02-2018, 06:35 PM | #4 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,210
|
Re: pre-mci rocker shaft end cap
I would install a cup type freeze plug. Stick a caliper in hole and see what size it is. Put some sealant on it and you should be good to go.
I looked close at a head today and looked like the cup plug was center punched in a few places to hold it tight. Not sure how one could come out. Tom. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G2 Rocker Shaft Support Arm | Gas Yamaha | |||
295cc Rocker Shaft Woes | Gas EZGO | |||
Tapered shaft adapter cut shaft pros and cons | Clone Engine Swaps | |||
Can a 20hp B&S vert shaft be made Horiz shaft? | Big Block Talk! | |||
need a ezgo rocker shaft | Golf Carts and Parts |