01-26-2020, 09:35 PM | #1 |
Not Yet Wild
Join Date: Oct 2019
Location: NY
Posts: 5
|
Putting in a lift kit
Just getting started on a winter project.
I have a 1993 club car ds gas. Putting in a 6" lift kit and having a little trouble.... on the rear I'm putting in heavy duty springs and the lift block . On this cart the rear end is attached to the engine and mounting plate and after putting everything together the hole in the lift block is 1 1/2" off from the alignment bolt on the spring and I can't muscle it in by hand. Will I have a problem if I rig up a bottle Jack and push it back out? Also by putting in the block it dropped the motor down the 6" and I can't see it coming back up with the heavy springs. Thanks for any help. CP |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-26-2020, 09:37 PM | #2 |
Not Yet Wild
Join Date: Oct 2019
Location: NY
Posts: 5
|
Re: Putting in a lift kit
Sorry the picture is upside down
|
01-26-2020, 10:45 PM | #3 |
Not Yet Wild
Join Date: Oct 2019
Location: NY
Posts: 5
|
Re: Putting in a lift kit
Sorry the picture is upside down
|
|
|
Similar Threads | ||||
Thread | Forum | |||
putting a lift on a 2007 electric drive | Electric Yamaha | |||
looking for tips on putting lift on. | Lifted Golf Carts | |||
need help putting f/r back together | Electric EZGO | |||
Putting blinkers on | Gas EZGO | |||
pics of putting my lift on! | Lifted Golf Carts |