|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-25-2020, 11:15 PM | #1 |
Not Yet Wild
Join Date: Feb 2014
Posts: 7
|
Ezgo L6 ignition switch wiring question
This is for a 2012 (I believe) Ezgo L6 gas cart. Please excuse my crude diagram drawing. I am wondering why the middle terminal is getting a ground when the ignition is in the "on" position. The blue wire that connects there is needing to be hot from that terminal, not a ground. The blue wire that goes on that terminal is also Piggy-backed with a red wire that goes to the fuel gauge (that's how I know it should be hot). When wired like I have it in the diagram, the lights work correctly when when the switch is in the "light" position. Any Help would be greatly appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Ignition Switch Help (where to connect hot wire on Radio to Ignition Switch) | Gas EZGO | |||
EzGo TXT 96 Ignition Switch Wiring Help! | Electric EZGO | |||
Ignition Switch Wiring Question | Electric EZGO | |||
Ezgo fuel/ignition switch question | Gas EZGO | |||
Ezgo fuel gauge/ignition switch question | Gas EZGO |