|
09-09-2011, 10:34 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2011
Posts: 2
|
Ez-Go Ignitor
I am in need of a Ingitor for a 1993 ezgo golf cart. The cart has the 295 engine. There are 5 wires coming out of this sealed unit. It is made by Denki #881127.
Thanks if anyone can help me find one, I just cant spend $185. for this old of a cart. Old Farmer |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-09-2011, 11:26 AM
|
#2 |
|
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: Ez-Go Ignitor
I would replace that ignitor unit with a 4 pin HEI module. These run about 40.00. They can be found on ebay and maybe some sponsors might carry them. You keep your ignition coil and pulsar unnit and the wires from those units connect to the hei. Hei should mount to aluminum flat bar and be grounded. Connection details are on the schematic at the bottom of the page link below.
http://www.buggiesgonewild.com/ezgo-...iagram-id.html |
|
|
|
|
09-10-2011, 09:10 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2011
Posts: 2
|
Re: Ez-Go Ignitor
Thanks alot Jeff, I was thinking there was some cars and trucks with a pulsar switch which required a HEI.
I'll give it a shot. |
|
|
|
|
09-12-2011, 08:54 PM
|
#4 |
|
Warthog cart
Join Date: Aug 2011
Posts: 502
|
Re: Ez-Go Ignitor
My ignitior was shot too, I just finished the HEI conversion and it works great.Well worth the $20 you might spend on it.I got my unit from a junk distributor from a Chevy smallblock.
Took me an hour and the diagram on this site is right on. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB G-9 Ignitor | Golf Carts and Parts | |||
| Ignitor | Gas EZGO | |||
| ignitor | Gas EZGO | |||
| wtb ignitor | Golf Carts and Parts | |||
| Looking for a Ignitor 85 EZ-Go Gas | Golf Carts and Parts | |||
Linear Mode
