06-06-2013, 03:07 PM | #1 |
Not Yet Wild
Join Date: Oct 2009
Location: Yuma, AZ
Posts: 55
|
Compression reading
What iis the acceptable compression reading for a '91 EZGo 295cc, and what is the acceptable difference between cylinders?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2013, 05:49 PM | #2 |
Gone Wild
Join Date: May 2011
Location: Las Vegas NV
Posts: 330
|
Re: Compression reading
It should run at 125 psi. A difference of 10% is acceptable.
|
06-07-2013, 08:00 AM | #3 |
Not Yet Wild
Join Date: Oct 2009
Location: Yuma, AZ
Posts: 55
|
Re: Compression reading
Thanks for the reply. I was afraid of the 10% difference. I have 125 and 155 cold reading. I will have to look further for the problem.
|
06-07-2013, 08:48 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Compression reading
145 is good
I have seen 165 125 should be rebuilt according to the manual. |
06-07-2013, 10:17 AM | #5 |
Not Yet Wild
Join Date: Oct 2009
Location: Yuma, AZ
Posts: 55
|
Re: Compression reading
Thanks again. Now to go shopping for overhaul parts.
Gordon |
|
|
Similar Threads | ||||
Thread | Forum | |||
fe290 Compression reading? | Gas Club Car | |||
1991 Yamaha g2 compression reading 100 psi | Gas Yamaha | |||
Voltage reading | Electric EZGO | |||
Battery Reading | Electric EZGO | |||
Harley compression reading | Gas Harley Davidson |