06-16-2013, 12:09 PM | #1 |
Not Yet Wild
Join Date: Oct 2012
Location: Michigan
Posts: 34
|
2pg oil pump driver
I just got back to rebuilding my motor. The old lower end had a oil pump driver on the end of the crank. The replacement lower end does not have this. I have it almost done and don't want to tear it all apart. So is there a driver that hooks onto the flywheel or am I going to just mix fuel for this one.
Don |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-16-2013, 02:42 PM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 2pg oil pump driver
Welcome Don to BGW Yea your just going to mix the fuel from now on. Mix the first tank at 40:1 or 3oz. per gallon and 128:1 or 1oz. per gallon after that. 1 1/2 oz. per gallon won't hurt if your running it hard. You may remove the hose where it enters the intake and plug that hole then remove all of the injection pieces to free up room. Most of us do this if the old pump fails your out an engine and you won't no until it's to late.
LOU |
|
|
Similar Threads | ||||
Thread | Forum | |||
club car ds iq main driver | Electric Club Car | |||
WTB: G1 driver side axle | Golf Carts and Parts | |||
g1 new fuel pump still wont pump HELP | Gas Yamaha | |||
help driver and driven clutches to use | Big Block Talk! |