|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
09-28-2013, 07:16 PM
|
#11 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi governor
Just let your ears be the judge of the engine revving too high..
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-02-2013, 11:01 AM
|
#12 |
|
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 2014 efi governor
do i need to change the oil to synthetic, are should i wait? the cart has no miles on it....brand new!!!!!
|
|
|
|
|
10-02-2013, 03:10 PM
|
#13 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: 2014 efi governor
In the long run you will want to go with the synthetic. Maybe get a few hours on it and then change it.
|
|
|
|
|
10-07-2013, 01:24 PM
|
#14 |
|
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 2014 efi governor
ok i did the zip on the governor, it did make a big improvement on speed but it sounds like it is going to blow up and when i stop the exhaust was smoking pretty good. i am worried about messing up the motor
|
|
|
|
|
10-07-2013, 01:41 PM
|
#15 |
|
Not Yet Wild
Join Date: May 2009
Location: Fredericksburg, va.
Posts: 16
|
Re: 2014 efi governor
I put a tach on mine and it showed 2880 for RPM. This is a safe rev for the motor.
|
|
|
|
|
10-08-2013, 12:37 AM
|
#16 |
|
Getting Wild
Join Date: Jul 2010
Posts: 117
|
Re: 2014 efi governor
New mufflers smoke!
|
|
|
|
|
10-08-2013, 06:41 AM
|
#17 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi governor
When you hear the engine rev loud and your not gaining anymore speed is the limit
|
|
|
|
|
06-13-2014, 12:23 PM
|
#18 |
|
Not Yet Wild
Join Date: Jun 2014
Location: Lake Livingston, Tx
Posts: 1
|
Re: 2014 efi governor
Can someone post a pic of the exact location of where the zip tie would be placed. Thanks.
|
|
|
|
|
06-13-2014, 01:17 PM
|
#19 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi governor
 |
|
|
|
|
06-18-2014, 10:22 PM
|
#20 |
|
Getting Wild
Join Date: Apr 2012
Posts: 110
|
Re: 2014 efi governor
if you just zip the gov and nothing else your speed will be around 20 mph for more speed with less rpms add high speed gears and 10 in high profile tires. in all try to keep the rpms at or below 3000 rpms at max running speed or you will do engine damage
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Governor | Gas EZGO | |||
| 94 governor | Gas Club Car | |||
| G1 governor | Gas Yamaha | |||
| G1 governor help | Gas Yamaha | |||
| governor | Gas Club Car | |||
Linear Mode
