06-20-2014, 07:32 PM | #1 |
Not Yet Wild
Join Date: Jun 2014
Posts: 9
|
EZGO lift kit ??
Hello everyone, I have a 98 EZGO with the 295 stock motor and it has about a 4" drop axle lift kit. My question is can i put a 6" spindle lift on it with the already dropped axle. If so what mods must be done. Steering? Shocks should stay the same? Fabricating blocks for the rear to level it out shouldn't be a problem. Any info would be appreciated on the front. Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-20-2014, 09:35 PM | #2 |
Not here yet
Join Date: Sep 2013
Location: jupiter florida
Posts: 504
|
Re: EZGO lift kit ??
Can you? sure I guess if you want. I would not do it you might be ok at low speeds but I bet handling would be bad at any speed
|
06-21-2014, 07:08 AM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: EZGO lift kit ??
Your drop axle lift has a preset amount of camber in it to maintain tire alignment (non-adjustable). A drop spindle lift also has camber preset in it also. If you add these together you will have too much camber as they were not designed to be installed on top of one another. Your tires will look funny and the cart will handle like crap. It can be fixed if you are a good fabricator with decent welding ability.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
lift for my 99 ezgo | Lifted Golf Carts | |||
88 EZGO Lift Kit | Gas EZGO | |||
Lift an ezgo without a kit?? | Electric EZGO | |||
EZGO RXV Lift Kit | Lifted Golf Carts | |||
2002 EZGO Gas with EZGo 5" Lift Kit | Members Rides |