New motor and cart wont go

giwhop · 01-02-2012, 07:37 PM

Changed out battery pack and cart barely creeps along

scottyb · 01-02-2012, 07:56 PM

First thing to check is how much voltage is the cart getting at the mains?
We are going to need all the pertinent info about your cart to help.

giwhop · 01-02-2012, 08:54 PM

[QUOTE=scottyb;668425]First thing to check is how much voltage is the cart getting at the mains?
We are going to need all the pertinent info about your cart to help.[/

I plugged my computer up to the controller and put it in monitor mode and with the gas fully pressed had above 37 volts the whole time also throttle output was 100% and sorry for being such a pain but what do you mean by pertinent info thanks again for all the help

Coltf1991 · 01-03-2012, 10:31 AM

Relevant info about your cart. He needs ALL info pertaining to your buggie. Anything you can tell us about it will help.

scottyb · 01-03-2012, 10:36 AM

Your controller is set up for 48v. Under voltage should be set at 20-24v for 36v carts. This may well be the problem. Let us know when you finish reprogramming and testing.

Coltf1991 · 01-03-2012, 10:40 AM

Ohhhhhh! Good eye Scotty

giwhop · 01-03-2012, 09:41 PM

Quote:

Originally Posted by scottyb

Your controller is set up for 48v. Under voltage should be set at 20-24v for 36v carts. This may well be the problem. Let us know when you finish reprogramming and testing.

Reprogrammed cart and put under voltage at 24 and motor runs great thanks for all the help i really appreciate it.

01-02-2012, 07:37 PM	#11
giwhop Not Yet Wild Join Date: Jun 2009 Location: Grand Isle Louisiana Posts: 30	Re: New motor and cart wont go Changed out battery pack and cart barely creeps along

01-02-2012, 07:56 PM	#12
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: New motor and cart wont go First thing to check is how much voltage is the cart getting at the mains? We are going to need all the pertinent info about your cart to help.

01-02-2012, 08:54 PM	#13
giwhop Not Yet Wild Join Date: Jun 2009 Location: Grand Isle Louisiana Posts: 30	Re: New motor and cart wont go [QUOTE=scottyb;668425]First thing to check is how much voltage is the cart getting at the mains? We are going to need all the pertinent info about your cart to help.[/ I plugged my computer up to the controller and put it in monitor mode and with the gas fully pressed had above 37 volts the whole time also throttle output was 100% and sorry for being such a pain but what do you mean by pertinent info thanks again for all the help

01-03-2012, 10:31 AM	#14
Coltf1991 Gone Wild Join Date: Jul 2011 Location: Houston, TX Posts: 2,901	Re: New motor and cart wont go Relevant info about your cart. He needs ALL info pertaining to your buggie. Anything you can tell us about it will help.

01-03-2012, 10:36 AM	#15
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: New motor and cart wont go Your controller is set up for 48v. Under voltage should be set at 20-24v for 36v carts. This may well be the problem. Let us know when you finish reprogramming and testing.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-03-2012, 10:40 AM	#16
Coltf1991 Gone Wild Join Date: Jul 2011 Location: Houston, TX Posts: 2,901	Re: New motor and cart wont go Ohhhhhh! Good eye Scotty

Similar Threads
Thread	Forum
2002 club car FE290cc motor just wont run	Gas Club Car
Motor sounds like it's spinning but cart wont move	Columbia ParCar
1995 36 volt club car motor wont run	Electric Club Car
Motor turns but wont go!	Electric Club Car
91 2-Stroke EZ GO Motor Rebuild Wont Start	Gas EZGO