97 TXT Wiring Issue

Whardin6 · 04-10-2018, 07:46 PM

Hey everyone just been googling for days trying to find answers and it’s not ending up too well. I have a request: those with a 97 and has the electronic forward/reverse as your shin please post up a pic of your solenoid. I picked up a junker and trying to get it all running.
At first it was always energiezed, no matter the key position it would drive. Replaced the ignition switch, now it turns off.
But the tow/run switch doesn’t work. I have the entire switch off and it still drives, and I have a feeling the previous owner did some creative rewiring.

The solenoid has no diode across the small terminals but has a large chipset looking resistor/diode pack across the large leads.

Any and all help would be appreciated.

LukeL · 04-10-2018, 07:50 PM

Is this a DCS drive system you are talking about? The PDS wasn’t out then. So I’m assuming it is.

Sent from my iPhone using Tapatalk

Whardin6 · 04-10-2018, 08:14 PM

I believe you are correct. It only has one harness plug on the controller, and can’t be freedom chipped.

LukeL · 04-11-2018, 06:58 AM

Heres some wiring diagrams for the DCS.

https://r.tapatalk.com/shareLink?sha...8&share_type=t

Sent from my iPhone using Tapatalk

04-10-2018, 07:46 PM	#1
Whardin6 Not Yet Wild Join Date: Apr 2018 Posts: 2	97 TXT Wiring Issue Hey everyone just been googling for days trying to find answers and it’s not ending up too well. I have a request: those with a 97 and has the electronic forward/reverse as your shin please post up a pic of your solenoid. I picked up a junker and trying to get it all running. At first it was always energiezed, no matter the key position it would drive. Replaced the ignition switch, now it turns off. But the tow/run switch doesn’t work. I have the entire switch off and it still drives, and I have a feeling the previous owner did some creative rewiring. The solenoid has no diode across the small terminals but has a large chipset looking resistor/diode pack across the large leads. Any and all help would be appreciated.
Whardin6 Not Yet Wild Join Date: Apr 2018 Posts: 2

04-10-2018, 07:50 PM	#2
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: 97 TXT Wiring Issue Is this a DCS drive system you are talking about? The PDS wasn’t out then. So I’m assuming it is. Sent from my iPhone using Tapatalk

04-10-2018, 08:14 PM	#3
Whardin6 Not Yet Wild Join Date: Apr 2018 Posts: 2	Re: 97 TXT Wiring Issue I believe you are correct. It only has one harness plug on the controller, and can’t be freedom chipped.
Whardin6 Not Yet Wild Join Date: Apr 2018 Posts: 2

04-11-2018, 06:58 AM	#4
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: 97 TXT Wiring Issue Heres some wiring diagrams for the DCS. https://r.tapatalk.com/shareLink?sha...8&share_type=t Sent from my iPhone using Tapatalk

Similar Threads
Thread	Forum
Wiring issue	Electric EZGO
TXT wiring issue	Electric EZGO
wiring issue	Gas Club Car
txt wiring issue	Electric EZGO
wiring issue	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum