2010 Club Car Precedent Brake Lights Not Working

[jantrree]

Good Question. Where would the flasher be and how would I identify it?

[tlr6334]

In the dash where your light switch is located

[jantrree]

Originally Posted by tlr6334

In the dash where your light switch is located

I see a three prong female receptacle (only two actual connections) that is empty. Is that where the flasher might connect?

[jantrree]

After installing new flasher (there was not one installed) and brake light timer relay, all seems to be working fine. Thanks for all the input from the forum.

[shadowman]

Originally Posted by jantrree

After installing new flasher (there was not one installed) and brake light timer relay, all seems to be working fine. Thanks for all the input from the forum.

thats kinda what i thought.......................................

[DGCarts]

Ok guys, I have a question for you. The cart is a 2009 Precedent and I have added the rear bucket harness with standard Madjax light kit (headlights/taillights).

I’m Looking to hook up just brake lights with no turn signals, 4 ways or horn. . As it stands right now I have the headlights and tail lights working (big deal ...right!) I have installed the required brake light switch and timer to the pedal well and all harness hookups are done in the well. I need to know what trick there is in getting power to the pedal well (remember we will not be installing the turn signal switch, flasher or relay.)

Thanks
Dar

[93yellowclubcar]

Zooooombie thread!!!

[DJBlade]

Ensure the two gray wires on in the dash are connected. They feed 48 volts to the relay that feeds 12 volts to the brake switch. The relay is necessary.