2002 IR cart/ detroit golf club??????? adjust speed

[93yellowclubcar]

I say go for it too, you can always switch to 8 volts later with no money lost by going this route if it doesn't work. Keep us posted when you get that serial number, as well as posting up some pics!

[Stevegrmich]

. . . how much for golf cart?

[BigBen07]

Bsa_bob,
I've got the alpha cell 220's in my 3003 and so far they work great. I've got about 40 min of run time on the cart and they are still at 46v so the charger won't even kick on yet.
Just my 2 cents

[sunoco]

Originally Posted by BigBen07

Bsa_bob,
I've got the alpha cell 220's in my 3003 and so far they work great. I've got about 40 min of run time on the cart and they are still at 46v so the charger won't even kick on yet.
Just my 2 cents

Not much makes sense in this sentence. They work great but after only 40 mins they are at 10-20%? What do you mean the charger won't kick on?

[bsa_bob]

Originally Posted by stevegrmich

. . . How much for golf cart?

$800.00 Ingersol rand.....made.It was buried in the mud, but looks like i may have some welding. And replacement of the frame in a few areas

[bsa_bob]

Originally Posted by sunoco

Not much makes sense in this sentence. They work great but after only 40 mins they are at 10-20%? What do you mean the charger won't kick on?

yeah i didn't get the gest of that sentence either???

[sunoco]

800 bucks is a steal for that cart

[Stevegrmich]

with Sunoco . . . at $800, even putting in new correct batteries, you can't get hurt . . .

[BigBen07]

Originally Posted by sunoco

Not much makes sense in this sentence. They work great but after only 40 mins they are at 10-20%? What do you mean the charger won't kick on?

What I meant is when the batteries were installed (fully charged) the we're putting out about 51 volts. Now after about 40 min of runtime they are still at 48.3 volts ( I just checked) thats not much drop right?
And the charger from what I gather, won't kick in until it drops to 43 volts or so.
What am I missing?

[Stevegrmich]

Originally Posted by BigBen07

What I meant is when the batteries were installed (fully charged) the we're putting out about 51 volts. Now after about 40 min of runtime they are still at 48.3 volts ( I just checked) thats not much drop right?
And the charger from what I gather, won't kick in until it drops to 43 volts or so.
What am I missing?

. . . charger should kick in no matter how much or how little cart is driven . . .