Anyone have speed magnet on a GE motor cart

billpinsc · 02-11-2014, 09:00 PM

I have a 2003 IQ cart. It has the gray GE Motor with the black snap in speed sensor. I want to add the speed magnet, but I have heard some say it will work and others say it will not work. I know there are two different magnets. I just want to make sure someone has used it and it will work with my cart. Thanks for the help.

TahoeDawgZ71 · 02-11-2014, 09:15 PM

It works perfectly. I've installed quite a few.

mrgolf · 02-11-2014, 09:56 PM

I think you have to remove the motor to change it. Whatever you do DO NOT try taking the screws on each side of the speed sensor out to try installing it that way.

I went another route after the screw up. I would like to know how the magnet comes off the shaft. It appeared to be glued or pressed on to me. Like I say I went another route.

TahoeDawgZ71 · 02-11-2014, 10:20 PM

I always just pry it out with two screwdrivers and it pops off. It's not "pressed" on per say... It's snugly tapped on with a small hammer. It should come off fairly easily.

RPatten · 02-12-2014, 10:31 AM

Mine did not come off easily and I could not put screws back in. I learned the hard way. But then a certain so called CC dealer told me I had the motor for a speed magnet. This is the same one who did not use the appropriate hardware when securing new batteries.

So now I have a PQ bandit.....

02-11-2014, 09:00 PM	#1
billpinsc Not Yet Wild Join Date: Feb 2013 Location: South Carolina Posts: 28	Anyone have speed magnet on a GE motor cart I have a 2003 IQ cart. It has the gray GE Motor with the black snap in speed sensor. I want to add the speed magnet, but I have heard some say it will work and others say it will not work. I know there are two different magnets. I just want to make sure someone has used it and it will work with my cart. Thanks for the help.

02-11-2014, 09:15 PM	#2
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Anyone have speed magnet on a GE motor cart It works perfectly. I've installed quite a few.

02-11-2014, 09:56 PM	#3
mrgolf Old Sky Soldier Join Date: Dec 2011 Location: Kentucky Posts: 3,881	Re: Anyone have speed magnet on a GE motor cart I think you have to remove the motor to change it. Whatever you do DO NOT try taking the screws on each side of the speed sensor out to try installing it that way. I went another route after the screw up. I would like to know how the magnet comes off the shaft. It appeared to be glued or pressed on to me. Like I say I went another route.

02-11-2014, 10:20 PM	#4
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Anyone have speed magnet on a GE motor cart I always just pry it out with two screwdrivers and it pops off. It's not "pressed" on per say... It's snugly tapped on with a small hammer. It should come off fairly easily.

02-12-2014, 10:31 AM	#5
RPatten Gone Wild Join Date: Aug 2013 Location: Columbia SC Posts: 266	Re: Anyone have speed magnet on a GE motor cart Mine did not come off easily and I could not put screws back in. I learned the hard way. But then a certain so called CC dealer told me I had the motor for a speed magnet. This is the same one who did not use the appropriate hardware when securing new batteries. So now I have a PQ bandit.....

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Speed magnet GE motor	Electric Club Car
Speed Magnet Accidental Find for DS IQ Regen with GE Motor	Electric Club Car
High Speed Motor Magnet fairplay 5.5 zx	Star and Fairplay
GE high speed motor magnet ???	Electric Club Car
Speed Magnet Accidental find for DS IQ Regen with GE Motor	Extreme DC!